ELSR-LS
Self-regulating heating cable
Usage
- Frost protection and heating products
- Power range 10-25 W/m
- Available in different designs for many uses
-
65 °C -
80 °C -
EX
-
Can be cut and crossed for perfect adaptation
-
UV-resistant
The self-regulating heating cable ELSR-LS is suitable for light industrial use, for example in sprinkler systems or similar. The cable is suitable for frost protection and temperature maintenance in the low temperature range. It is also approved for use in hazardous areas, so-called EX areas.
ELSR-LS
Specifications
| Specification | Data |
|---|---|
| Connection voltage | 230 V |
| Number of conductors | 2 pcs |
| Bending radius, min. | 25 mm |
| Exposure temperature (power off), max. | 80 ºC |
| Exposure temperature (power on), max. | Up to 65 ºC |
| -AO | Protective conductor: Aluminium foil, Outer casing: TPE |
| Installation temperature, min. | -60 ºC |
| Insulation material outer | TPE-O |
| Cable type | Self-regulating 2-conductor with screen |
| Classification (Ex) | EPS II 2G Ex 60079-30-1 IIC Gb EPS II 2D Ex 60079-30-1 IIIC Db |
| Conductor area | 1,23 mm² |
Documents
Installation
*" Heating circuit lengths on the following conditions
- 230 V nominal voltage
- Delayed action circuit breakers (C-characteristic) with 80 % max. load
- Maximum 10 % line voltage drop on heating cable bus wire
- Power connection to one heater end
- In certain installation situations, the heating circuit length may vary. Please contact our engineers.
