Ebeco launches flexible ground sensor
Ebeco has developed an entirely new solution for ground sensors for snow melting. It is an innovative design of a combined temperature and moisture sensor that will make the work easier for you as an installer.
Smart functionality
A smart feature of the ground sensor is that it has an adjustable sensor adapter, allowing the level to be adapted even after the ground level has been finalized. The ground sensor can also be adjusted afterward by lifting out the sensor unit to adjust the level or during an inspection. Use the designated slots and lift the sensor unit with the help of two screwdrivers. The sensor is capacitive and thus maintenance-free.
Ground sensor that saves electricity
Compared to an installation with only temperature control, this combined control system provides energy savings of up to 90%. Ebeco’s service, "Operating Forecast," helps to gather data and simulate energy consumption per year. A fantastic tool for installing Ebeco’s ground and roof solutions.
Components for ground snow melting
Multiflex 27
Series-resistive 2-conductor with screen
- Snow melting installations
- Laid in a sand bed or embedded in concrete
-
Cable -
240-380 W/m²
Snowmat
Series-resistive 2-conductor with screen on mesh
- For snow melting, ground
- Laid in a sand bed or embedded in concrete
-
Mesh -
300 W/m²
MI-60
Series-resistive 1-conductor with screen
- Can be installed directly in asphalt
- Snow melting installations
- Laid in a sand bed or embedded in concrete
-
Cable
-
240-380 W/m²
Quick Board
Insulation board
- Suitable for snow melting, ground
- For normal traffic loads
-
(λ) 0.034 W/mK -
(R) 0,88 m²K/W -
30 mm
Electrical enclosure
Combined temperature and humidity control
- Snow melting installations
- Frost protection
- Underfloor heating
-
Energy program -
Display