Energy saving with insulation
We know that energy consumption and good comfort are important to you. That is why we have developed a complete range of insulation boards so that you can always find a solution that suits your needs and your conditions.
An energy-efficient system depends on how well-insulated the construction is. Our insulation boards are made of extruded polystyrene (XPS), which makes the board light, compression resistant and insensitive to water. Adding insulation to a heating system makes a big difference compared to an uninsulated construction.
We also recommend our insulation boards for heavy constructions, i.e. a large concrete mass. This is to achieve a lightweight construction that provides a fast-acting system for optimal performance.
Using a typical 60s/70s house with an uninsulated floor construction of 15 cm thick concrete slab on the ground as a reference installation, an energy saving of up to 50% can be achieved.
Cable Board
Insulation board for underfloor heating under tiled flooring
The Cable Board insulation board is designed for Cableflex and Cable Kit with finished rounded grooves to place the heating cable in. This means that the cable is easily installed in the grooves with a constant c/c distance that provides even heat dissipation.
Energy saving
Compared to the reference installation, Cable Board provides an energy saving of up to 45%.
Subflooring
On concrete surfaces, Cable Board can be used in both wet rooms and dry areas. On wooden surfaces, it may only be used in dry areas and then replaces the plasterboard in the floor construction. In wet rooms with wooden subfloors, we recommend Thermo Board.
Ebisol
Insulation board for wooden and laminate flooring with or without underfloor heating
The Ebisol insulation board is designed for Foil 230 V, Foil 48 V and Foil Kit 500.
Energy saving
Compared to the reference installation, Ebisol 3 mm provides an energy saving of up to 18% and Ebisol 6 mm up to 27%.
Subflooring
Ebisol is flexible and can be laid on all surfaces.
Thermo Board
Insulation board for underfloor heating under tiled flooring
Thermo Board is a fibreglass-reinforced insulation board for underfloor heating, designed for use with Thermoflex and Thermoflex Kit, or in combination with Cable Kit in wet rooms with wooden joists.
Energy saving
Compared to the reference installation, Thermo Board provides an energy saving of up to 36%.
Subflooring
It is a flexible insulation board that can be laid on both concrete and wooden surfaces.
Quick Board
Insulation board for snow melting ground
The Quick Board insulation board is designed for snow melting ground, Multiflex 27, Snowmat, Snowmelt and MI-60. The combination gives fast and energy-efficient snow melting.
Energibesparing
Compared to a reference installation without insulation, Quick Board provides an energy saving of up to 50%.
Subflooring
You prepare the substrate in the same way as for a normal surface coating without a snow melting system. In other words, you just follow the normal recommendations from your stone or paving dealer.
Sizing
Quick Board is designed for normal traffic loads in a home environment or similar. Contact us for assistance if you need an application for environments with regular heavy traffic.