Thermoflex Kit 200

  • Thermoflex Kit 200
  • Thermoflex Kit 200
  • Thermoflex Kit 200

Do you like the simplicity of laying underfloor heating using heating cable on self-adhesive mat? Then Thermoflex Kit 200 is for you. This solution can be used on open, regular surfaces with few obstacles. The EB-Therm 205 thermostat included in the package has two adjustable energy savings programs.

The heating cable is thin and only adds 4 mm in height. It is already fitted to a self-adhesive mat, which is rolled out and fixed at the same time. Installation is fast and easy, because there is no need to measure cc-distance or fix the cable. The mat can easily be cut and angled as needed. Thermoflex Kit can be installed on top of existing floor structures, such as concrete, plasterboard or chipboard. It is laid in a thin layer of filler.

Simple and fast installation

The Thermoflex Kit 200 is based on a heating cable that is pre-mounted on a self-adhesive mat.
The mat can be rolled out and fixed in one move. Installation is quick and easy as there is no need to measure c/c-distance or fix the cable. The mat can easily be cut and angled as needed. The connecting cable and heating cable sheathing are halogen free.

Thermoflex Kit 200 can be installed on top of existing floor structures, such as concrete, plasterboard or particle board. The heating cable is laid on a thin layer of filler.

Energy-efficient control with EB-Therm 205 thermostat

Easy to control the underfloor heating with the EB-Therm 205 thermostat. EB-Therm 205 has two preset energy saving programs that ensure you have energy-efficient control of your underfloor heating. The two energy savings programs are also individually adjustable, which makes it possible to adapt the underfloor heating entirely to the user's needs.

Save energy by insulating more

For a really energy-smart system, we recommend installing Thermoflex Kit 200 with the efficient Thermo Board insulation. The board can be used on almost all substrates and structures. Thermoflex Kit, together with Thermo Board, provides a fast system and you also avoid downward heat loss. Read more on how you can energy optimise your underfloor heating installation.


Technical information

The kit includes: Heating cable mat, thermostat EB-Therm 205, spiral tube

Subflooring Concrete, plasterboard or chipboard
Floor material Floor tiles, natural stone
Room type Wet room, dry room
Output 120/160 W/m²
Cable diameter c. 4 mm
Cold cable length 2.5 m
Cable type 2-wire with shielding
Cable cc-distance - prefitted 9 cm
Mesh Alkaline resistant fibreglass mesh
Connection voltage 230 V
Lowest installation temp Cable: -5°C Tape: +18°C
Approval CE

* Adhesion is reduced at low temperature.
Read more about installation and guarantees for our underfloor heating.


Thermoflex Kit 200 with EB-Therm 205

Item number

Total output

Output per m²




8960230 150 W 120 W/m² 0.5 m 2.5 m 1.25 m²
8960232 200 W 120 W/m² 0.5 m 3.4 m 1.7 m²
8960234 250 W 120 W/m² 0.5 m 4.2 m 2.1 m²
8960236 340 W 120 W/m² 0.5 m 5.4 m 2.7 m²
8960238 410 W 120 W/m² 0.5 m 6.8 m 3.4 m²
8960240 480 W 120 W/m² 0.5 m 7.8 m 3.9 m²
8960242 530 W 120 W/m² 0.5 m 8.8 m 4.4 m²
8960244 640 W 120 W/m² 0.5 m 1.,8 m 5.4 m²
8960246 780 W 120 W/m² 0.5 m 13.2 m 6.6 m²
8960248 940 W 120 W/m² 0.5 m 1.,8 m 7.9 m²
8960249 1170 W 120 W/m² 0.5 m 19.2 m 9.6 m²
8960250 1380 W 120 W/m² 0.5 m 23 m 11.5 m²


1700 W 120 W/m² 0.5 m 28 m 14 m²

We give a 12 year basic warranty on everything included in the underfloor heating pack. Also applies to Ebeco's insulating boards that are installed in combination with the underfloor heating. Our warrantyccovers 100 % of the attendant costs of any damage.

Ebeco AB provides a 5-year product warranty for supplied thermostats.

We also give you the opportunity to extend the warranty period for the underfloor heating to 25 years if you register on our form. The warranty on the thermostat remains at 12 years however. All terms and conditions may be found in the warranty certificate.

  • Heightening frame

    Ebeco's EB-Therm thermostats are designed for recessed or surface fitting. A heightening frame is used for surface fitting. The heightening frame is suitable for all EB-Therm models.
    Item number name Dimensions Colour
    8581686 Heightening frame Ebeco 87x87x29 mm White (RAL 9003)
  • Primer +

    Primer +
    Primer + is used for installing Cable Kit, Cable Board or Thermoflex Kit on existing floors (chipboard, plasterboard or concrete). Sufficient for approx. 25 m².
    Item number Item
    8960550 Primer +, 1 litre
  • Front Cover for EB-Therm 205

    EB-Therm 205 original colour is polar white. The Front Cover accessory gives the possibility of changing colour to suit some of the most popular systems on the market.. Frame not included.
    Item number Name Dimensions
    8581618 (1) Front Cover Anthracite for Exxact 55x55x18 mm
    8581617 (2) Front Cover Metallic for Exxact 55x55x18 mm
    8581616 (3) Front Cover Alu for Elko Plus 55x55x16 mm
    8581615 (4) Front Cover Black for Elko Plus 55x55x16 mm
    8581620 (5) Front Cover White ELJO Trend 55x55x15 mm
PDF version