Concrete curing cable

Series-resistive 2-conductor with screen


  • To start curing concrete in cold temperatures
  • To accelerate the drying of the concrete
  • Heating during the construction process
  • Kabel
  • 40 W/m
    40 W/m
  • Stickkontakt
  • Easy to install
  • Ensures and speeds up the construction process
BHS is a heating cable specially designed for curing and drying concrete, as well as heating. The system speeds up concrete curing and enables formwork to be dismantled sooner. The heating cable, which is fixed to the reinforcement, can be reconnected at a later stage for effective drying or heating. The heating cable is equipped with a connection cable. The heating cable is of the 2-conductor type, which makes it simple and quick to lay.

Concrete curing cable


Specification Data
Connection voltage 230 V
Length Connection cable 2,0 m
Number of conductors 2 pcs
Bending radius, min. 50 mm
Diameter 4 mm
Output 40 W/m
Installation temperature, min. -10 ºC
Insulation material intermediate XLPE
Insulation material inner XLPE
Insulation material outer XLPE
Cable type Series-resistive 2-conductor with screen
Enclosure class IP44, IP67
Mechanical classification M2
Protective conductor Aluminium foil
UV resistance No


The general terms of delivery are listed below.

Our warranty terms


Approximate outputs for BHS at specified outdoor temperature

BHS graf

* In combination with a 10 mm concrete covering mat, the power output can be significantly reduced, up to 50% (50 W/m², c/c 76 cm).