Moisture sensor for use in roof systems. Used as an accessory for EB-Therm 800 in max-/min positions. Including 24 V AC/DC transformer with attachment strap.
Moisture and temperature probe for melting snow on the ground. Used as an accessory for EB-Therm 800 in max-/min positions.
The Smartlock connector enables you to join and branch very quickly. Smartlock S for joining heating cables and Smartlock P for connections.
You will need to use this item with your EB-Therm 800 if you wish to use it as a room thermostat or Max/Min thermostat for roof systems.
SmartClip F is used to install the T-18 heating cable on the eaves plate.
SmartClip H is used to install the T-18 heating cable in guttering.
SmartClip H makes installing the heating cable in guttering quick and easy.
SmartClip U is used to install the T-18 heating cable in downpipe spouts.
SmartClip U makes installing the heating cable in the downpipe spout quick and easy.
Complete connection kit for Ebeco T-18 for installation with Smartlock.
Complete kit for splicing Ebeco F-10.
Used when installing Ebeco T-18/T-18 CT or Frostvakt 25 to support the heating cable when lowering into drainpipes/gutters.
Used for installing Ebeco T-18 heating cable for frost protection of gutters and drainpipes. Sufficient for 50 m cable.
Sealing compound for 2 connection boxes. Hardens in 10 minutes at 20°C. Mixed at temperatures above -10°C. Can be dismantled. Non-toxic, no protective gloves are needed but avoid contact with eyes. Max 1000 V IP68.
Informs that heating cable is installed.
Used for fixing heating cables in industrial installations.