Thermoflex 45 and 60

  • Thermoflex 45 and 60
  • Thermoflex 45 and 60
  • Thermoflex 45 and 60

Thermoflex 45 and 60 are low power solutions that make it possible to install comfort floor heating in new builds. The underfloor heating is used on open, regular surfaces with few obstacles in both dry and wet areas. Control your underfloor heating easily with our EB-Therm range of thermostats.

Comfort heating provides comfortable floors

Houses that are being built today have very low energy requirements. However, there may still be a need for underfloor heating of surfaces where the floors can be experienced as cold. Thermoflex 45 and 60 are low power solutions that make it possible to install comfort floor heating in new builds.

Comfort underfloor heating is a concept used to describe underfloor heating intended to make floors comfortable to walk on, that is to say not perceived as cold. Comfort underfloor heating even provides a drying affect and is used to complement other primary heat sources.

Climate-smart floor heating for the sake of the environment

EU’s goal is to reduce our consumption by 20 % before the year 2020. Because of this, we have developed underfloor heating solutions with 45 and 60 W/m² effect that make it possible to install underfloor heating without exceeding maximum limits.

Underfloor heating on self-adhesive mesh

Thermoflex can be used for open, regular surfaces of floor tile or natural stone. Thermoflex is laid in a thin layer of filler on top of the existing floor structure, such as concrete, plaster or chipboard and the build height is only 4 mm. Underfloor heating can easily be controlled with a thermostat.

The heating cable is a series resistive, screened 2 conductor, mounted on a self-adhesive, alkali resistant, fibreglass mesh. Outer casing and connecting cable in halogen-free design. With the fixed c/c dimension, the solution is quality assured. The mat is simple to install as it is rolled out and fixed in one step. The length and angle of the Thermoflex can be cut to fit the floor surface perfectly. Build height is low - only 4 mm.

Control with EB-Therm

We can warmly recommend our range of thermostats for controlling underfloor heating. With EB-Therm 205EB-Therm 400 or EB-Therm 800  you have all the possibilities of an energy-smart system. All Ebeco's underfloor heating thermostats are digital and guarantee a minimum of temperature fluctuations.

Technical information

Subflooring

Concrete, plasterboard or chipboard

Floor material

Floor tiles, natural stone

Room type

Wet room, dry room

Cable c/c-distance - prefitted

10 cm

Cable diameter

ca 4 mm

Connection cable

3 m

Cable type

2-wire with shielding

Mesh

Alkaline resistant fibreglass mesh

Output

45/60 W/m²

Recommended installation temp.

 Lower temperature than +18 °C reduces the mesh adhesiveness

Connection voltage 230 V

Approval

CE

Articles

Thermoflex 45

Artikelnr

Total output

Outout per m²

Width

Length

Area

8960201

60 W

45 W/m²

0,5 m

2,6 m

1,3 m²

8960203

95 W

45 W/m²

0,5 m

4,2 m

2,1 m²

8960207

130 W

45 W/m²

0,5 m

5,6 m

2,8 m²

8960209

160 W

45 W/m²

0,5 m

7,2 m

3,6 m²

8960211

205 W

45 W/m²

0,5 m

8,8 m

4,4 m²

8960213

245 W

45 W/m²

0,5 m

10,8 m

5,4 m²

8960215

300 W

45 W/m²

0,5 m

13,2 m

6,6 m²

8960254

335 W

45 W/m²

0,5 m

15,4 m

7,7 m²

8960256

400 W

45 W/m²

0,5 m

18,4 m

9,2 m²

 

Thermoflex 60

Artikelnr

Total output

Outout per m²

Width

Length

Area

8961000

60 W

 60 W/m²

0,5 m

2,6 m

1,3 m²

8961001

125 W

60 W/m²

0,5 m

4,2 m

2,1 m²

8961002

170 W

60 W/m²

0,5 m

5,6 m

2,8 m²

8961003

215 W

60 W/m²

0,5 m

7,2 m

3,6 m²

8961004

265 W

60 W/m²

0,5 m

8,8 m

4,4 m²

8961005

325 W

60 W/m²

0,5 m

10,8 m

5,4 m²

8961006

395 W

60 W/m²

0,5 m

13,2 m

6,6 m²

8961007

460 W

60 W/m²

0,5 m

15,4 m

7,7 m²

8961008

550 W

60 W/m²

0,5 m

18,4 m

9,2 m²

Warranty

We give a 12 year basic warranty on everything included in the underfloor heating pack. Also applies to Ebeco's insulating boards that are installed in combination with the underfloor heating. Our warrantyccovers 100 % of the attendant costs of any damage.

Ebeco AB provides a 5-year product warranty for supplied thermostats.

We also give you the opportunity to extend the warranty period for the underfloor heating to 25 years if you register on our form. The warranty on the thermostat remains at 12 years however. All terms and conditions may be found in the warranty certificate.

Accessories
  • EB-Therm 400 ®

    EB-Therm 400
    Great for energy-efficient control. Can be programmed with your own timings. Large, clear display.
    Item number Name Dimensions
    8581609 EB-Therm 400 87 x 87 x 39 mm
  • EB-Therm 205 ®

    EB-Therm 205
    Simple and energy smart with two built-in energy saving programmes. Popular model with a neat design.

    Item number

    Name

    Dimensions

    8581608 EB-Therm 205 87x87x40 mm
  • EB-Therm 800 ®

    EB-Therm 800
    Unique DIN-mounted thermostat that allows you to choose between four different operating modes.
    Item number Name Dimensions
    8581610 EB-Therm 800 90x35x70 mm
  • Spiral tube

    Spiral tube
    Spiral tube for thermostat sensor cable. End connection ensures that fixing and sealing compounds cannot enter. Ebeco Adapter (E 89 605 51), which makes it easier to handle the transition between box and spiral tube when installing a thermostat, is not included.
    Item number Name Length DI DY
    8960541 Spiral tube for thermostat sensor 2.5 m 7.5mm 10.0mm
PDF version