EB-Therm 30 ®

  • EB-Therm 30®
  • EB-Therm 30®
  • EB-Therm 30®
  • EB-Therm 30®

Underfloor heating thermostat with control knob and integrated Residual Current Device. EB-Therm 30 is the ideal solution for renovation use.

All our thermostats are digital and microprocessor controlled. This keeps temperature fluctuations to a minimum, which gives an even heat and lower energy consumption. The temperature in the floor fluctuates less than +/- 0.4 degrees. The EB-Therm 30 thermostat is equipped with an integrated Residual Current Device at 30 mA, a floor sensor and is also prepared with an input for “pilot wire” that can reduce the temperature setting.

Technical information

The pack includes: Polar white front and frame for Eljo trend, front for Elko, floor sensor 3 m, and connection clamps.

Connection voltage 230 VAC-50Hz
Floor temperature range 5 - 35 °C
Circuit-breaking capacity 12 A /230 VAC / single pole
Connection cable max 2.5 mm²
Load Cos φ = 1
Connection difference ±0.4 °C
Enclosure class IP21
Sensor cable 3 m
Max extension sensor cable 10 m, 2 x 1.5 mm²
Thermostat dimensions 84x84x41 mm
Suitable for frame systems Eljo Trend, Elko 
EMC-certified Copes with surge voltage of 2500 VAC
Approval CE
Directive RoHS, WEEE
Item number Name Dimensions
6681630 EB-Therm 30 84x84x41 mm

Ebeco AB provides a 5-year product warranty covering material faults for our control units.
All terms and conditions is found here.




PDF version