• Frostvakt 10®
  • Frostvakt 10®
  • Frostvakt 10®
  • Frostvakt 10®

Ebeco Frostvakt 10 is a simple way to prevent damage and leaks caused by frost-shattered pipes and water conduits. The cable together with the associated gland is type approved for drinking water according to KIWA (approval 1289).

Versatile frost protection solution

Frostvakt 10 is a PVC-free heating cable with a pre-mounted plug that easily plugs into an earthed wall socket via an earth fault breaker.

Approved for installation in drinking water

Frostvakt 10 with optional Supplementary Set F-10 is an approved frost protection solution that is very well suited for drinking water pipes. Extensive tests conducted by the accredited certification company KIWA show that Frostvakt 10 with the associated cable gland is a safe frost protection solution that does not negatively affect health.

Self-regulating heating cable

The heating cable cannot overheat because it is self-adjusting. And it can be crossed to fit the pipe perfectly. It is parallel resistive, which means that the self-adjusting heating cable consists of two parallel wires embedded in a semiconductor material that adapts its output according to the ambient temperature. Even though it may above zero outside and the frost prevention effect is not needed, the heating cable will still be turned on. To turn it off completely, you must pull out the plug or use Frostvakt Control, which turns the cable off in temperatures above freezing point. For longer cables and internal use, control with a thermostat is always recommended.

Effective frost protection solution

For internal fitting, Frostvakt 10 can provide frost protection for a 32 mm uninsulated plastic pipe down to -30 ° C. In the event of even lower temperatures, the pipe can be insulated. Supplementary Set F-10 is used for internal fitting. The maximum connection length for interior laying is 60 m. Available in pre-cut lenghts 2-100 m. The cable is also sold by the metre.

Technical information
DIMENSIONS 7.3x5.3 mm
MAX OPERATING TEMPERATURE 65°C
LOWEST INSTALLATION TEMPERATURE -10°C
CONNECTION VOLTAGE 230 V
SMALLEST BEND RADIUS 35 mm
OUTPUT 10 W/m at + 5°c when fitted to metal pipe
MAX LENGTH AT 10 A 100 m fitted outside
  60 m fitted inside
APPROVAL CE
Articles
Item number Name Output RSK number
8960422 Frostvakt 2 m 20 W 2404860
8960424 Frostvakt 4 m 40 W 2404861
8960426 Frostvakt 6 m 60 W 2404862
8960428 Frostvakt 8 m 80 W 2404863
8960430 Frostvakt 10 m 100 W 2404864
8960433 Frostvakt 13 m 130 W 2404865
8960436 Frostvakt 16 m 160 W 2404866
8960439 Frostvakt 19 m 190 W 2404867
8960442 Frostvakt 22 m 220 W 2404868
8960445 Frostvakt 25 m 250 W 2404869
8960446 Frostvakt 30 m 300 W 2404996
8960447 Frostvakt 35 m 350 W 2404997
8960448 Frostvakt 40 m 400 W 2404998
8960450 Frostvakt 50 m 500 W 2404999
8960452 Frostvakt 60 m 600 W 2405000
8960454 Frostvakt 80 m 800 W 2405001
8960456 Frostvakt 100 m 1000 W 2405002
       
Accessories
  • Supplementary set F-10

    Additions kit F-10
    Used with internal fitting of Ebeco F-10 and has oval packing specially designed for the cable's shape, which means that the screw fitting has a safe, tight seal. Drinking water approved. Thread R15/R20.
    Item number Name
    8960410 Supplementary set F-10
  • Thermostat for DIN-mounting

    Thermostat for keeping warm and frost protection
    Art. No Article
    8581632 Thermostat Termonic DIN, -15°C to +95°C
  • Thermostat, enclosed IP54

    Thermostat for keeping warm and frost protection
    Art. No Article
    8581642 Thermostat Termonic IP54, -15°C to +95°C
PDF version